Home
Bondhus Products
Bondhus Catalog & Literature
Felo Products & Literature
Where to Buy

 


Click here for more information

Bondhus Products | Custom Products | Features

 L-Wrenches

Multi Packs | Ball End | ProHold® Tip Ball End | Stubby Ball End | Hex End
Tamper Resistant Hex | BriteGuard™ Ball End | BriteGuard™ Stubby Ball End
BriteGuard™ Hex End | GoldGuard™ Ball End | GoldGuard™ Hex End | Star Tip
ProHold® Star Tip | BallStar™ Tip | Tamper Resistant Star Tip | Bondhex™ Cases

 

  • Available in a wide range of lengths and tip styles
  • Chamfered tips for faster insertion and full tool engagement in the screw head
  • Tools are made with Protanium® steel which is heat treated for more torque and longer tool life
  • Three finish options available

High Torque Steel:
Up to 20% stronger, with more torque and twice the wear resistance of standard grades of steel.

 

Corrosion-resistant finish:
Environmentally safe, provides better tool grip, resists solvents, and is 5 times more corrosion resistant than competitor finishes.

 

Next generation chrome finish:
Traditional placed tool look with superior protection and durability.

 

Real 14 karat gold finish:
Superior protection and durability over traditional chrome and the look and shine of real gold

More than just another L-Wrench

Bondhus is committed to making the best tools on the market. Bondhus is constantly working to improve our tools. We are never satisfied with “good enough.” We work hard to make sure your new Bondhus L-Wrench is always the best tool for the job.

 

Precision machining is critical for a ball end tool to function optimally. Understandably, the smaller a ball end tip is, the more complex the task of machining becomes.

Bondhus maintains incredibly tight tolerances and close clearances between ball end tips and the screw head walls. Bondhus machining accurately maintains the precise geometric shape of the ball on all six sides. Surfaces are smooth, and corners are sharp and clean, even on a tool as small as .050” (1.27mm).

Precise machining results in Bondhus ball end tips having more surface area contacting the screw wall than any other competitor. Bondhus ball end tools far outwear the competition, and dramatically reduce stripping. Fastener wear is also greatly reduced.

 

Bondhus chamfers every Hex and Star Tip tool we make. This process eliminates burrs and imperfections in the tool’s tip that can prevent the tool from fitting properly or seating fully within the screw head.

Every Bondhus tool is designed and machined to achieve an optimal fit between tool and fastener. Tools insert quickly and easily into screw head and fit snug to generate greater torque and minimize slipping and stripping.

Bondhus custom heat-treating produces tools that are highly resistant to breakage and shattering.
 

Home | About Us | Bondhus Products | Bondhus Catalog | Felo Products | Technical Library | Where to Buy
Contact Bondhus | News | Site Map | Privacy Policy | Distributor Resources | Employment

Copyright © 2012 Bondhus Corp.